Floriography Ruffle Pillow Tutorial

Here's the same pillow and the tutorial in fabulous rainbow colors!
Enjoy!

Free Tutorials with Floriography

I'm back from Market and I've had a good nap! Lauralee and I worked hard for weeks on all of these projects and we are so excited to share them with you! We'll be posting each of them over the next couple of weeks as free tutorials! 

Here's a sneak peek of what's to come...

Floriography

There's nothing better than finally getting to see your designs on fabric! Floriography is my first line with Riley Blake Designs and I couldn't be more pleased with how it turned out!  

Quilt Market is just a few weeks away and we'll be sewing like mad women to get everything done for my booth. Check in often to watch the progress and then see the booth in it's entirety May 16th! 

-Chelsea

Peeps, Peeps, and more Peeps!

Sorry we have been MIA lately.  With another fun holiday weekend and family in town life gets a little crazy.  Hopefully now things will slow down and get back to normal.
If your anything like us you have tons of Easter candy leftover, especially PEEPS!  Even though they are so yummy there are only so many I can eat.  I searched my favorite place, PINTEREST, and found a delicious way to use these little sweeties up.
 

Peeps Popcorn

 

 

Sometimes my cooking from pinterest posts don't turn out that well but this one was quick and easy and DELICIOUS!  Thank you Kristin at yellowblissroad.com for the amazing picture and recipe.

Enjoy.  I think I need to go make me some right now!

-Lauralee

 



DIY Stenciled Parson Chair Slipcovers...

Making your own Parson Chair Slipcovers is easy! Easier than you think, 

And I'm going to show you how.

Supply List: 

*2.5 - 3yds of fabric per chair 

Matching thread

 Computer, Printer, Paper

Masking Tape

Foam Paint Brush

Acrylic paint in the color of your choice

*To be sure take measurements of your chair to figure out how much fabric is needed. You may want longer or shorter skirt. I did 3yds per chair to be safe and just in case I messed up the numbering, but I did have about 1/2 yd left over at the end. 

Tip: I left my fabric folded so that I could cut out two at a time and then I used those pieces as pattern pieces to cut out the other two. 

1. Piece 1: Place the fabric over the chair cushion and cut it leaving extra length on the end and the sides. You can follow the angles of the cushion when you cut or just leave it with excess fabric. It doesn't matter because you are going to custom fit it in a minute.  You'll pin, trim, and then sew.

2. Piece 2: Lay the fabric over the back of the chair, leaving a little extra and cut it. Pin the two pieces together.

3. Piece 3: Cut a third piece for the front of the chair, that is a little longer than from the cushion to floor. Pin to piece 1. 

4. Sew the pieces together. 

5. Cut out 2 side pieces and pin them to Piece 1 and Piece 3. Sew them together.

It's ok to have excess fabric on the edges because you can pin, trim, and then sew.

6. Pin the sides, nice and snug. Trim and sew.

 Tip: I serged all the edges to keep them from fraying and to help the top fit snug, I sewed a curve around the top corners of the chair. 

 

7. Turn the cover right side out and make sure everything is fitting snug. If it's loose anywhere, re-pin and sew. 

8. Decide where you want to hem it, pin it, trim it, then sew it. Done!

 

To stencil numbers or letters on the back. 

1. On your printer, print out the numbers/letters of your choice. I used the Engravers MT font at size 900. 

2. Tape over the entire number with clear packing tape

3. Cut out the black part of the number, tape or pin it to the back of the chair (where you want it)

 

4. Use a foam brush and dab paint over the number. When you get close to one of the edges, press down right on the edge with your hand to keep the paint bleeding outside of the edges. 

I pulled the stencil right off and then let it dry. Done!

 

 If you make a mistake when painting, consider using your left over fabric to make a large patch. Cut it out to be slightly larger than the number. Maybe 9.5" x 12" or whatever looks good to you. Sew around all the edge of the fabric, then dampen the fabric and throw it in the dryer to fray the edges. Trim it up so there isn't any crazy long threads. Paint the numbers onto the fabric then sew the fabric to the back of the chair cover, covering up your mess up.  This will just give an even more vintage and authentic look. Everyone will love it!  

I hope you enjoyed this tutorial. Good Luck!

xoxo,

Chelsea

DIY French Inspired Distressed Dining Table...

For those of you who loved my Dining Room Makeover from last week and want to know how to distress your own dining table, we've got a tutorial!

Supplies:

• a sturdy old dining table
• course sand paper to sand down the table
• base coat in paint in Beach House White, by Behr from Home Depot with primer in it
• top coat of paint in Gem Turquoise by Behr
• steel wool
• medium or fine sandpaper for distressing
• roller brush with an additional brush and 2 - 4 foam brushes
• clear topcoat
• tarp to protect the floor

My table has already been painted white for a few years, so I don't have a picture of this first step.

1.First sand your table and get off an lacquer or bumps and be sure to sand out any scratches or dents too. Wipe off the table and let it dry. Paint  the table with a roller brush in Beach House White and let it completely dry.

2. Poor a big blob of your top coat color, smack dab in the middle of the table and evenly roll it on the entire top of the table. While it is still wet, run a foam brush over the top to give it a little vintage hand painted look. Then evenly paint the sides and base of the table with the foam brush.

3. Let the table completely dry. Next gently sand the whole entire table with the steel wool. This gets rid of bubbles, bumps, and little paint blobs you may have missed. This might rub off some of the paint, but you'll want to use the sand paper for that to really get a nice distressed look. 

sand the table with steel wool

Pay no attention to the paint on my...oops!

Using the medium coarse sandpaper, sand the sides, edges, and top of the table. I just did it randomly all over until I liked the way it looked. If you mess up, just paint over it with the foam brush and then buff it out with the steel wool. 

 Wipe the table down really well and get rid of any loose particles. Put a finishing polycrylic clear coat over the top to protect your work. I gave it 2 coats to be safe.  Let it dry and wipe it down with soap and water. All Done!

Send us pictures of your new table! We'd love to see them: ruthiebemaude@gmail.com

xoxo

Chelsea

Chelsea's Dining Room Makeover...

I have a confession...  

I am renter

There, now I said it and it's out in the open.

I loved renting at first. Never having to worry about fixing things that break down or fall apart. Never any obligation to stay in one place. It was great for the 3 years we were in California going to Chiropractic School, but we've been out of school for 3 years now and are still renting. It totally stinks!

I know there are much worse things than being an eternal renter, but when you have an addiction to painting everything you own and you love a lot of detail, renting is torture. 

My solution to this little problem of mine has been finding things around the house that I'm sick of looking at OR heading out on a Saturday to yard sales or thrift stores and finding things that are cheap, old, and usually pretty ugly to make over. My husband will tell you, I have some really hideous things tucked away for a later date. Just hideous.

 This seems to have done the trick for the time being and I'm actually really excited about turning this whole neutral zone I'm living in, into a DIY wonderland!

 Today I'm starting today with my dining room. It got a complete makeover and I'm in LOVE.

 The first thing I did was paint my old dining table. It was my parents and has been in my family for 40 years or so. It started out a nice chocolaty brown that was fabulous for it's first 30 years of use, but it got beat up and outdated. So I painted it beach house white by Behr which I totally loved, but let's face it, white gets dirty and my whole entire house is painted all one color. They seriously spray painted the walls, doors, ceilings, and baseboards one single color. It's so boring and totally blah!  The white table seemed to blend into the walls and I just couldn't stand it for one more day. 

 So, I went to Home Depot, wearing my favorite turquoise ring and found a paint color that matched it perfectly. I am obsessed with turquoise so why not paint my most favorite piece of furniture that color?  The result is beautiful!  I'll have a tutorial up next Tuesday on how to paint a table just like this, with the name of the paint color too!

 The next thing I did was fix up my Grandpa Rock's old dining chairs. They were pretty much ready to paint and just needed a few screws tightened and a new chair cushion. I spray painted them Winter Gray in gloss by Krylon and cut up my old curtains made from Amy Butler's Belle fabric in orange and aqua (my all time favorite) to make new cushions.

Then I made custom covers for my extremely cheap Target brand Parson Chairs. These babies have lasted us almost 6 years! I'm kind of amazed.  We kept the plain brown leather for the first 3 years, then did Pier One slipcovers that were cute enough, but this takes the cake! Made from a simple canvas fabric, with numbers stenciled on the back. I'm in Love.

I'll have a tutorial on the chairs in a week!

I created a little drama with some custom striped drapes hanging from ceiling to floor from some fancy, but very inexpensive rods from Target. Click HERE for a tutorial on how to make your own striped curtains. 

For the finishing touches, I went to a favorite local home dec store of mine called Tai Pan (oh yeah! They're online!) for dishes and nick-nacks.  I also added fresh herbs to some pre-labled pots to give it some Green.

For the framed pictures, I spray painted old frames in the same winter gray as the dining chairs and printed out E A T on my home computer. The runner on the dinging table is made from the same fabric as the Parson Chairs. I cut it into a long strip, zig zagged around the edges, and then threw it in the dryer to give a vintage touch.

The stunning geometric rug is from Target, but was borrowed from our theater room floor.  I think it might have to stay!

All in all this dining room makeover was easily under $200 (not including the rug). Using coupons for my fabric purchase's was key in keeping the cost down. 

Other ways to save when redoing a room is to snag things from other areas of the house. You can also replace it later with something new or something from another room!  I also love having nick nack swapping party with friends. That's loads of fun and it always feels like something new. 

I hope you enjoyed my Dining Room Makeover! So once again here's the before and after pics. I seriously can't even believe the before was in my house.  Not cute!

Before

After

WOW!

xoxo

Chelsea